Distributors for Valves and dampers product line

DISTRIBUTEUR UNTEL

Home > Valves and dampers > Air barrier dampers

Air barrier dampers

Caracteristics

The RBA are insulation damper 100% tight by air barrier, which is recommended when there is an absolute necessity to avoid any passage of gas from upstream to downstream.
When the butterflies close, one air barrier fan injects air in the space between shell and the two butterflies. The overpressure obtained in that space avoids any passage of gas.
Air barrier can, on specific demand, be heated to avoid acid condensation.
RBA M dampers with hollowed butterfly were especially designed to reduce distance between flanges.
This type of damper is especially used for insulation of cogeneration engine or turbine, of boiler and of fan.

RBA D / RBA MD

RBA D and RBA MD dampers are air barriers dampers with circular section.
– Dimensions: de DN 500 à DN 2000
– Current temperature: up to 550°C
– Current pressure: up to 600mm WC

– Download technical file RBA D
– Download technical file RBA MD

info portfolio

**RBA MD DN1200**

Air barrier damper with a hollow butterfly.
This equipment, with a reduced distance between flanges, is installed in a cogeneration unit where the gain of place is critical. 2 fans are installed (one for operation and one as safety element).

**RBA D DN600**

Simple air barrier damper to isolate a motor.

**RBAD DN3200 à 2 x 2 louvres**

Damper used to isolate the by-pass of a filter.

**RBAD DN500**

Damper with heating electrical box to inject heated overpressure air.

**RBA D DN1200**

Air barrier damper with 2 butterflies. This damper is used to isolate a fan in a cogeneration unit.

RBA S / RBA MS

RBA S and RBA MS dampers are air barriers dampers with rectangular section.
– Dimensions: de DN 500 à DN 2000
– Current temperature: up to 550°C
– Current pressure: up to 600mm WC

– Download technical file RBA S
– Download technical file RBA MS

info portfolio

**RBA S 1200x1700**

Air barrier damper with an air tank to move the damper in safety position in case of instrument air failure.

**RBA MS 900x1200**

Air barrier damper with reduced distance between flanges installed in a cogeneration unit.
The pneumatic actuator is equipped of a air tank to move the damper in safety position in case of instrument air failure.

**RBA S 2000x2000**

Air barrier damper with 2 fans (one for operation and one as safety element)

**RBA S 2500x2500**

Air barrier damper installed in a cogeneration plant.

**RBA S 2600x2400**

Air barrier damper installed to isolate the by-pass of a filter.

**RBA S 1200x1000**

Air barrier damper with 2 fans (one for operation and one as safety element)

CCMG - ZI Porte Rouge - F27150 ETREPAGNY - Tel. +33(0)2 32 55 25 02 - Fax +33(0)2 32 27 10 22